phone-icon-accent
About Us Special Offers Call Us Book Online

Odenton, MD

star-alt Request Service
Repairman Toolbox Electric

Electrical Services in Odenton, MD From a Local Electrician You Can Trust

When you need electrical services in Odenton, MD, Venus Electric is just up the road in Millersville. Our licensed electricians work in Odenton homes throughout the 21113 ZIP code, from Piney Orchard to the neighborhoods around Fort Meade.

As a woman-owned, locally operated company, we keep things simple. We explain what we find, give you a fair price, and get the job done right. One Odenton customer thanked us for coming out on a Sunday to help, and that’s the kind of service we stand behind.

Here’s what Odenton homeowners call us for most:

Need an electrician in Odenton? Contact us online or call 443-747-7909 to schedule service.

Panel Upgrades and Service Replacements in Odenton

Older panels can struggle with today’s appliances, AC units and electronics. Call us if you notice:

  • Breakers that trip often or won’t reset
  • A panel with no open spaces for new circuits
  • Buzzing, warmth or a burning smell near the panel

On a recent Odenton job, we replaced the home’s entire main electrical service. That included a new panel and breakers, an exterior emergency disconnect, surge protection, a new service cable, and updated grounding and bonding. We also added a new AC circuit with a disconnect and a new kitchen countertop circuit to stop breakers from tripping. As always, we pulled the permits, scheduled the inspections, and coordinated the tie-in with BGE.

Electrical Troubleshooting When You Lose Power

Hidden wiring problems are some of the most common calls for electrical services in Odenton, MD. Recent repairs in town include:

  • A kitchen and dining room that lost power with no tripped breaker. We found a failed connection inside a junction box buried under insulation in the crawlspace.
  • A bedroom outlet that suddenly went dead. It had been wired backward at a junction point, and we corrected the whole circuit.
  • A breaker that tripped while vacuuming and wouldn’t reset. The cause was melted wires on an outlet in another room.

If you smell burning, see sparks or lose power to part of your home, call us. We offer emergency electrical service 7 days a week, 6 a.m. to 11 p.m.

Dedicated Circuits for Kitchens, Pools and Hot Tubs

Big equipment needs its own circuit to run safely. In Odenton, we’ve recently:

  • Wired a new pool with a 95-foot conduit run and a 50-amp feeder powering the pump, gas heater, three lights and a service outlet
  • Quoted eight new circuits for a basement kitchenette, including the permit and inspections
  • Tested a dedicated hot tub circuit from end to end. The wiring checked out, so we gave the homeowner an honest answer: the problem was in the hot tub itself.

Outlets, Switches and Smart Home Upgrades

Need more power where you live and work? We recently added three new outlets to an Odenton bedroom and finished the work the same day. We’ve also rewired a switch bank with four three-way switches and one four-way switch.

Near Piney Orchard, a homeowner’s new video doorbell and smart lock kept losing power. The cause was a 1990s doorbell transformer. We replaced it with a higher-output model, and both devices worked right away. Learn more about our smart home installation services.

Pre-Sale Repairs and Safety Inspections

Selling your Odenton home? We’ve helped sellers fix inspection items the same day, including double-tapped breakers, missing GFCI outlets, loose disposal wiring and a missing smoke detector.

Our electrical safety inspections also catch code issues before they become problems, like multiwire circuits on the wrong type of breaker. Some older homes in the area have aluminum branch wiring. Our aluminum wiring restoration service uses connectors made for aluminum-to-copper connections to reduce fire risk.

Serving Odenton and Nearby Communities

Along with electrical services in Odenton, MD, we serve nearby Fort Meade, Severn, Crownsville, Glen Burnie and our home base of Millersville. Check our current specials to save on your next project.

Ready to schedule electrical services in Odenton, MD? Call 443-747-7909 or contact us online today.

Odenton Electrical FAQs

Do I need a permit for electrical work in Odenton?

Most bigger jobs do, like panel upgrades, service replacements, new circuits and pool wiring. Odenton is in Anne Arundel County, so permits go through the county. We pull the permit and schedule the inspection for you.

I’m moving to the Fort Meade area and buying a home in Odenton. What should I have an electrician check?

Before closing, it’s smart to have the panel, breakers, GFCI outlets and smoke detectors looked at. Our electrical safety inspection covers all of that and gives you a clear list of anything that needs attention, so there are no surprises after you move in.

I tried a DIY electrical fix and something went wrong. Can you help?

Yes, and it happens more than you’d think. We’ve helped Odenton homeowners after a switch replacement caused a spark and after outlets stopped working. Turn off the breaker for that area if you can do it safely, then give us a call. We’ll make it safe and wire it correctly.

My new video doorbell or smart lock keeps losing power. Is it the device or my wiring?

Often it’s the doorbell transformer. Many older homes have transformers that can’t power today’s smart devices. We recently fixed this exact problem near Piney Orchard by installing a higher-output transformer, and both devices worked right away.

My hot tub keeps shutting off. Is it the electrical?

Sometimes, but not always. We test the dedicated circuit from the panel to the disconnect to the tub. If the wiring checks out, we’ll tell you honestly that the problem is in the hot tub itself, so you don’t pay for electrical work you don’t need.

Why did part of my house lose power when no breaker tripped?

This is often a loose or failed connection, sometimes hidden inside a junction box in a wall, attic or crawlspace. It can cause arcing, so call an electrician instead of waiting for it to come back on.

Odenton Electrical FAQs

Do you serve Gambrills, Crofton, and Fort Meade, too?

Yes. Along with Odenton, we serve the nearby communities of Gambrills, Crofton, and Fort Meade. Our office is just up the road in Millersville, so we can usually get to you quickly. Call 443-747-7909 or request service online to schedule electrical work at your home or business.

What smoke alarms does Maryland require in my home?

Maryland law requires battery-only smoke alarms to be sealed units with a 10-year long-life battery. Many homes also have hardwired alarms with battery backup. We install hardwired, interconnected smoke detectors, so when one alarm sounds, they all sound, giving your family the earliest possible warning.

Can you install a ceiling fan where I only have a light fixture?

Usually, yes. A ceiling fan is heavier than a light and moves while it runs, so it needs a fan-rated electrical box. We check the box and wiring in your ceiling, replace the box if needed, and can add a wall control so you can run the fan and light separately.

Do I need whole-home surge protection?

Power surges from lightning or the utility can damage appliances, HVAC equipment, and electronics. Plug-in surge strips only protect what’s plugged into them. A whole-home surge protector is installed at your electrical panel and protects every circuit in the house. It’s a small investment compared to replacing a damaged appliance.

Can you install smart switches and dimmers?

Yes. We install smart switches and dimmers that let you control your lights from your phone, set schedules, and use voice assistants. We confirm your wiring is compatible, install and connect each switch, help you set up the app, and test everything before we leave.

Recent Jobs and Reviews in Odenton, MD

Rated 5.0 out of 5 stars based on 1 customer reviews

Customers say: The overall sentiment expressed across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and trust. Customers consistently praise the professionalism, punctuality, and clear communication they experienced, with many noting timely arrivals and efficient completion of work. There is a strong recurring theme of honesty and transparency, with reviewers appreciating straightforward explanations and fair pricing without unnecessary upselling. The quality of workmanship is frequently highlighted, with customers expressing confidence in the technical expertise and thoroughness demonstrated during various electrical projects, from routine repairs to complex installations. Many reviewers emphasize their intention to use the service again and actively recommend it to others, indicating a strong likelihood of repeat business and positive word-of-mouth. The tone is enthusiastic and appreciative, with customers feeling valued and well-informed throughout their interactions. Responsiveness and flexibility, even in urgent or challenging situations such as weekend emergencies or adverse weather conditions, are noted as particularly commendable aspects of the service. Overall, the reviews reflect a business that has successfully built a reputation for reliability, integrity, and high-quality electrical work, fostering genuine customer loyalty and satisfaction.

Odenton, MD at a glance

Venus Electric has completed 17 jobs in Odenton, MD between October 2025 and October 2026.

The one customer review shown here is rated 5.0 out of 5.

The most recent job was on October 12, 2026.

Venus Electric has completed 16 jobs in Odenton, MD in the last 12 months. The first job there was in October 2025.

Our Local Reviews by City

Job Locations and Reviews

Odenton, MD - Add receptacle in stairwell
Brian W.
Brian W. Checked in
Add receptacle in stairwell
Odenton, MD 21113
Brian W.
Brian W. Checked in
Evaluated a home in Odenton where excessive moisture and mirror fogging were causing issues in the master bathroom. We upgraded the ventilation system by removing an underperforming, noisy builder-grade unit and installing a high-CFM, whisper-quiet fan vented straight out the roof cap. We integrated a digital humidity-sensing wall switch that automatically activates the fan whenever moisture levels elevate.
Odenton, MD 21113
Odenton, MD - Remove ceiling fan, checked garage disposal for proper power
Brian W.
Brian W. Checked in
Remove ceiling fan, checked garage disposal for proper power
Odenton, MD 21113
Reason for the call was to replace the main electrical service. This includes replacing the main electrical box, replacing all breakers, installing an emergency disconnect on the exterior of the home, installing surge protection, replacing the service cable, updating grounding and bonding, pulling permits, scheduling inspections, and scheduling tie in with BGE. We ran a new circuit for the AC and installed a new disconnect. We also ran a new circuit for the kitchen countertop to avoid breakers tripping. Work is complete.
Reason for the call was to replace the main electrical service. This includes replacing the main electrical box, replacing all breakers, installing an emergency disconnect on the exterior of the home, installing surge protection, replacing the service cable, updating grounding and bonding, pulling permits, scheduling inspections, and scheduling tie in with BGE. We ran a new circuit for the AC and installed a new disconnect. We also ran a new circuit for the kitchen countertop to avoid breakers tripping. Work is complete.
Genny G.
Genny G. Checked in
Reason for the call was to replace the main electrical service. This includes replacing the main electrical box, replacing all breakers, installing an emergency disconnect on the exterior of the home, installing surge protection, replacing the service cable, updating grounding and bonding, pulling permits, scheduling inspections, and scheduling tie in with BGE. We ran a new circuit for the AC and installed a new disconnect. We also ran a new circuit for the kitchen countertop to avoid breakers tripping. Work is complete.
Odenton, MD 21113
Genny G.
Genny G. Checked in
Arrived at a home in Odenton where the homeowner said a bedroom outlet had stopped working completely with no tripped breaker and no explanation. The GFCI outlets in the bathroom nearby all tested fine. Traced the circuit carefully and found the bedroom outlet had been wired with the line and load terminals reversed at the junction point, meaning it had technically never been correctly connected and had finally lost contact at the reversed connection. Corrected the wiring, verified polarity at every downstream outlet on the circuit, and tested all under load. Dead outlet is live and wired correctly now and the homeowner finally has power at the desk where they needed it most.
Odenton, MD 21113
Odenton, MD - Today's visit was for quoting a basement area being converted to a small kitchenette. We will be running a total of (8) circuits, pulling the required permit, and scheduling all inspections. Customer will let us know in the next week if they would like to move forward with the work.
Genny G.
Genny G. Checked in
Today's visit was for quoting a basement area being converted to a small kitchenette. We will be running a total of (8) circuits, pulling the required permit, and scheduling all inspections. Customer will let us know in the next week if they would like to move forward with the work.
Odenton, MD 21113
Genny G.
Genny G. Checked in
Responded to a home in Odenton where the homeowner said the kitchen and several outlets in the adjacent dining room lost power simultaneously without any explanation and nothing was tripped at the panel. Ran a full diagnostic and found a buried junction box in the crawlspace below the kitchen where a wire nut had failed and the connection had been arcing intermittently until it finally separated completely. The connection had not been accessible because it was inside a box covered under several years of insulation. Opened the box, corrected the junction with a proper connector and secured enclosure, tested all affected circuits under load, and confirmed stable power throughout the kitchen and dining area.
Odenton, MD 21113
Odenton, MD - Today’s visit was for giving an estimate to relocate multiple appliances in the kitchen. We also saw live wires, running across the floor in one of the bedrooms and gave an estimate to re-feed that particular bedroom and make safe.
Genny G.
Genny G. Checked in
Today’s visit was for giving an estimate to relocate multiple appliances in the kitchen. We also saw live wires, running across the floor in one of the bedrooms and gave an estimate to re-feed that particular bedroom and make safe.
Odenton, MD 21108
Visit was for a property management company that needed a receptacle replaced. Work is complete.
Visit was for a property management company that needed a receptacle replaced. Work is complete.
Genny G.
Genny G. Checked in
Visit was for a property management company that needed a receptacle replaced. Work is complete.
Odenton, MD 21113
Genny G.
Genny G. Checked in
Arrived at a home near the Piney Orchard community in Odenton where the homeowner had just installed a new video doorbell and a smart lock on the front door and neither of them was holding a charge or maintaining a consistent network connection. Found the existing doorbell transformer was a 1990s-era unit that could not supply the consistent wattage the modern smart devices required. Replaced it with a higher-output transformer rated for smart doorbell systems, verified wiring continuity from the transformer to both devices, and tested network connectivity, motion detection, and remote lock operation from the homeowner's phone. Worked perfectly from the moment the new transformer was in. Thirty-year-old doorbell wiring and modern smart devices are not a great combination.
Odenton, MD 21113
Today's visit was for a new construction pool. We ran the conduit from the outside panel to the location of the new pool panel. We had to run conduit of the side of the house until we hit dirt and trenched from there. We brought it as low as possible for aesthetic purposes. The feeder was 50A which was more than enough to accommodate the new equipment. The run was approximately 95 feet. We installed 1 pump, 1 gas heater, 3 lights, and 1 service receptacle. Work is complete.
Today's visit was for a new construction pool. We ran the conduit from the outside panel to the location of the new pool panel. We had to run conduit of the side of the house until we hit dirt and trenched from there. We brought it as low as possible for aesthetic purposes. The feeder was 50A which was more than enough to accommodate the new equipment. The run was approximately 95 feet. We installed 1 pump, 1 gas heater, 3 lights, and 1 service receptacle. Work is complete.
Genny G.
Genny G. Checked in
Today's visit was for a new construction pool. We ran the conduit from the outside panel to the location of the new pool panel. We had to run conduit of the side of the house until we hit dirt and trenched from there. We brought it as low as possible for aesthetic purposes. The feeder was 50A which was more than enough to accommodate the new equipment. The run was approximately 95 feet. We installed 1 pump, 1 gas heater, 3 lights, and 1 service receptacle. Work is complete.
Odenton, MD 21113
Today's visit was for circuit tripping. Customer was using a vacuum cleaner. The breaker tripped and would not turn back on. We were able to find the receptacle where the issue was and fix the problem. The receptacle was in the other room that caused the breaker to trip. The wires were melted to the receptacle causing the breaker to trip. We replaced the receptacle and restored power. Work is complete.
Today's visit was for circuit tripping. Customer was using a vacuum cleaner. The breaker tripped and would not turn back on. We were able to find the receptacle where the issue was and fix the problem. The receptacle was in the other room that caused the breaker to trip. The wires were melted to the receptacle causing the breaker to trip. We replaced the receptacle and restored power. Work is complete.
Genny G.
Genny G. Checked in
Today's visit was for circuit tripping. Customer was using a vacuum cleaner. The breaker tripped and would not turn back on. We were able to find the receptacle where the issue was and fix the problem. The receptacle was in the other room that caused the breaker to trip. The wires were melted to the receptacle causing the breaker to trip. We replaced the receptacle and restored power. Work is complete.
Odenton, MD 21113
Today’s visit was for troubleshooting a dedicated hot tub circuit. The circuit was ran from the panel to a spa disconnect on the exterior of the house and then from the spa disconnect to the hot tub. The entire circuit was enclosed in PVC conduit protecting it from damage as required by the NEC Code. There is no way rodents or any kind of animal could have damaged the wiring. If that was the case, the breaker would trip immediately and it did not. I tested the wiring at each location. Once the hot tub was turned on, it would work for about five minutes and then stop while the electrical was still on. The lights continued to work, but the pump cut off. In my professional opinion, this is a fault in the hot tub. Not the electrical installation.
Today’s visit was for troubleshooting a dedicated hot tub circuit. The circuit was ran from the panel to a spa disconnect on the exterior of the house and then from the spa disconnect to the hot tub. The entire circuit was enclosed in PVC conduit protecting it from damage as required by the NEC Code. There is no way rodents or any kind of animal could have damaged the wiring. If that was the case, the breaker would trip immediately and it did not. I tested the wiring at each location. Once the hot tub was turned on, it would work for about five minutes and then stop while the electrical was still on. The lights continued to work, but the pump cut off. In my professional opinion, this is a fault in the hot tub. Not the electrical installation.
Genny G.
Genny G. Checked in
Today’s visit was for troubleshooting a dedicated hot tub circuit. The circuit was ran from the panel to a spa disconnect on the exterior of the house and then from the spa disconnect to the hot tub. The entire circuit was enclosed in PVC conduit protecting it from damage as required by the NEC Code. There is no way rodents or any kind of animal could have damaged the wiring. If that was the case, the breaker would trip immediately and it did not. I tested the wiring at each location. Once the hot tub was turned on, it would work for about five minutes and then stop while the electrical was still on. The lights continued to work, but the pump cut off. In my professional opinion, this is a fault in the hot tub. Not the electrical installation.
Odenton, MD 21113
Genny G.
Genny G. Checked in
Electrical Repair Service: Addressed concerns regarding older aluminum branch wiring in the home. Inspected accessible connections and found signs of oxidation and loose terminations. Performed approved remediation using proper connectors designed for aluminum-to-copper transitions. Secured all connections and reduced potential fire hazards associated with aging aluminum wiring.
Odenton, MD 21113
Review
Excellent experience, even came on a sunday to fix my mistake.
Thomas - Odenton, MD 21113
Genny G.
Genny G. Checked in
Today’s visit was for a couple of different reasons. Wiring in switch bank needed to be corrected. Customer also tried to replace a switch on their own and caused a spark. We installed (4) three-way switches and (1) four-way switch. While doing the assessment, we also saw that the panel had multiwire branch circuits on single pole breakers. We recommended to install Two pole breakers on the multi wire branch circuits to bring the panel up to code. We also recommended surge protection to protect all appliances and technology in the home. Customer proceeded with all of the work.
Odenton, MD 21113
Genny G.
Genny G. Checked in
Today's visit was for adding additional outlets in master bedroom. Customer would like additional power in master bedroom for general use. We installed three additional receptacles in the bedroom, one on each wall. Customer also requested surge protection for his main panel to protect his whole home. We gave the customer multiple options and completed the work same day.
Odenton, MD 21113
Today's visit was for performing inspection corrections. Customer is selling the house and needed the work completed ASAP. There were double tapped breakers, locations needing GFCI receptacles, disposal wiring not properly secured, and smoke detector needed to be installed. We came on-site, quoted, and performed the work same day. Work is complete and ready for closing day.
Today's visit was for performing inspection corrections. Customer is selling the house and needed the work completed ASAP. There were double tapped breakers, locations needing GFCI receptacles, disposal wiring not properly secured, and smoke detector needed to be installed. We came on-site, quoted, and performed the work same day. Work is complete and ready for closing day.
Genny G.
Genny G. Checked in
Today's visit was for performing inspection corrections. Customer is selling the house and needed the work completed ASAP. There were double tapped breakers, locations needing GFCI receptacles, disposal wiring not properly secured, and smoke detector needed to be installed. We came on-site, quoted, and performed the work same day. Work is complete and ready for closing day.
Odenton, MD 21113